The Berkshire Building is a newly constructed 4 story taupe and tan colored building. MicroTek is located on the 1st floor.
From Northwest:
- Take I-75 South to Florida’s Turnpike South.
- Take exit 328 on the left toward Orlando.
- Take I-4 West to North Kirkman Road (SR 435), exit 75B Pass the entrance to Universal Studios on your left.
- Stay on Kirkman Road for about 3.5 miles.
- Turn left on MetroWest Blvd. There are fountains on both sides of the entrance.
- Drive on MetroWest Blvd. for half a mile. Stay in the right lane.
- Turn right on Metrocenter Blvd. (opposite Robert Trent Jones Drive).
- The Berkshire Building is the 4 story office building on the right at 2145 Metrocenter Blvd.
From Northeast:
- Take Interstate 95 South to the Beachline Expressway (528) West.
- Stay on the Beachline Expressway until Interstate 4.
- Take the I-4 E, Downtown Orlando exit.
- Get in the left lane. Drive about 2.5 miles.
- Take the LEFT exit off of I-4. The exit is 75B, N Kirkman Road (SR 435)
- Pass the entrance to Universal Studios on your left.
- Stay on Kirkman Road for about 3.5 miles
- Turn left on MetroWest Blvd.
- Drive on MetroWest Blvd. for about half a mile. Stay in the right lane.
- Turn right on Metrocenter Blvd. (opposite Robert Trent Jones Drive).
- The Berkshire Building is the 4 story office building on the right at 2145 Metrocenter Blvd.
From Southwest:
- Take Interstate 4 East to exit 75B on the LEFT. This is Kirkman Road (SR 435)
- Pass the entrance to Universal Studios on the left.
- Stay on Kirkman Road for about 3.5 miles.
- Turn left on MetroWest Blvd.
- Drive on MetroWest Blvd. for about half a mile. Stay in the right lane.
- Turn right on Metrocenter Blvd. (opposite Robert Trent Jones Drive).
- The Berkshire Building is the 4 story office building on the right at 2145 Metrocenter Blvd.
From Southeast:
- Take Interstate 95 North to the Beachline Expressway (528) West.
- Stay on the Beachline Expressway until Interstate 4. Take the I-4 E, Downtown Orlando exit.
- Get in the left lane. Drive about 2.5 miles.
- Take the LEFT exit off of I-4 for Kirkman Road (SR 435).
- Pass the entrance to Universal Studios on the left.
- Stay on Kirkman Road for about 3.5 miles.
- Turn left on MetroWest Blvd.
- Drive on MetroWest Blvd. for about half a mile. Stay in the right lane.
- Turn right on Metrocenter Blvd. (opposite Robert Trent Jones Drive).
- The Berkshire Building is the 4 story office building on the right at 2145 Metrocenter Blvd.
From the Orlando International Airport: Either “A” or “B” side:
- Take the North exit 1B, Toll 528 W. This is also called the Beachline.
- The first toll is $0.75. The toll booths can make change for you.
- The second toll is $0.75.
- After about 10 miles, take the I-4 E, Downtown Orlando exit.
- Get in the left lane. Drive about 2.5 miles.
- The next exit will be on the left, off of I-4. The exit is 75B, N Kirkman Road, (SR 435)
- Pass the entrance to Universal Studios on your left.
- Stay on Kirkman Road for about 3.5 miles.
- Turn left on MetroWest Blvd. There are fountains on both sides of the entrance.
- Drive on MetroWest Blvd. for .5 miles. Stay in the right lane.
- You will turn right on Metrocenter Blvd. (opposite Robert Trent Jones Drive).
- The Berkshire Building is the 4 story office building on the right at 2145 Metrocenter Blvd.
Parking is complimentary.
We recommend renting a car at the airport, the hotels are not within walking distance to the facility and hotel shuttles travel only to the attractions.
You can book through Enterprise Rent-A-Car Directly Below:
If you need shuttle service, MicroTek recommends New Way Tours & Transportation. Please call (407) 226-8080 from 7 am until 11 pm EST to make a reservation. Ask for the MicroTek rate. Round trip from Orlando International Airport to the hotels in the Universal Studios or International Drive areas is $85 per person, or $16 per person if more than 4 are riding together. The round trip rate from the hotel to MicroTek is $30-$35 per person, or $7 per person if more than 4 are riding together.
You can also make your reservations at:
Specify the MicroTek rate under "Comments and Information" on the website's reservation page.